Need some help or advice on how to set up a mobile. This is the place to ask.
Moderator: JR Moderator
- 6 PILL USER
- Posts: 93
- Joined: Saturday, 04 February 2006, 22:00 PM
- Location: Clayton, NJ
Thinking of putting a 102' whip on my 2011 Ram. If you run one I would love to see some photos
- Posts: 7422
- Joined: Saturday, 12 June 2010, 19:05 PM
- Radio: Uniden Washington
- Antenna: Avanti Sigma II
- Name: Greg
- Location: Baltimore, MD
I run a 102" whip on my pickup, you can look at some of my old posts I'm sure you'll find pics of my install and mount.
"321, the Middle of Maryland"
23 AM "WORLD WIDE" 38 LSB
Strong Supporter of America's Original Homeland Security Act
The Second Amendment
Official Moderator - CBRT Complaint Department
- Posts: 415
- Joined: Tuesday, 17 April 2007, 18:29 PM
I did away with the 102" and spring and bought the 108" whip instead. A lot less flopping around and better swr than the 102. Its mounted on a Tri-Mag with 5" magnets dead center of my Ford F150 extra cab. I also ran a 1-1/4 " copper braid strap from the mount to the trucks frame though it probably wasnt needed. I run this 108 with a 2x8 FB amp and 9914 davis coax cable. SWR is 1.3 (sitting still)even with the amp on:-) A fine tuned BEAST!....
*In a Galaxy far far away*
- Posts: 196
- Joined: Friday, 14 December 2012, 18:10 PM
- Radio: Ken, Yaesu, Pres, Te
- Antenna: 102"GP, 2M Yagi
- Name: Chris
- Location: SW Ohio
I ran one on a Saturn with homemade trunk mount. Worked great but looked like an RC car!
[ Post made via Android ]
- Wordwide & Qualified
- Posts: 667
- Joined: Thursday, 29 April 2010, 13:22 PM
- Radio: madison on 5/8 wave
- Location: phoenix, arizona
out of aluminum,i made a 4" puck with a 4" backing plate for my SS whip and spring,ball, i think i am at about 109" but still flat swr . i should have made a blueprint cuase not i cant remember .
Who is online
Users browsing this forum: No registered users and 3 guests