Image

icom sm-30 wiring

Microphone Information Wiring etc, or if you just need help with choosing a good microphone for your radio.

Moderator: JR Moderator

User avatar
drdr2014
2 PILL USER
2 PILL USER
Posts: 19
Joined: Thursday, 21 January 2016, 14:23 PM

icom sm-30 wiring

Post by drdr2014 » Tuesday, 08 November 2016, 9:47 AM

I've picked an icom sm-30 desk mic that had a modular plug for yaesu 857d. Mic worked fine in that setup.
I want to use it on an Icom 756pro iii, so soldered an 8 pin plug using the following pinout. 1-white, 2-blue, 5-green, 6-black, 7-shield.
I cant get it to key the icom. Do I have it wired wrong or is there some other issue?


User avatar
MDYoungblood
Moderator
Moderator
Posts: 7165
Joined: Saturday, 12 June 2010, 19:05 PM
Logged in via: iPad
Radio: Uniden Washington
Antenna: Avanti Sigma II
Name: Greg
Location: Baltimore, MD

Re: icom sm-30 wiring

Post by MDYoungblood » Tuesday, 08 November 2016, 12:11 PM

You should have 5 pins hooked up,
pin 1 is microphone audio
pin 7 is the audio negative
pin 2 is 8v
pin 5 is PTT
pin 6 is PTT ground
Pins 3, 4, and 8 are N/C
Sorry but I don't know the color of the wires, you may have the grounds wrong. Check and see if the VOX works.

3's

Greg
ImageImageImage


"321, the Middle of Maryland"

23 AM "WORLD Image WIDE" 38 LSB

Strong Supporter of America's Original Homeland Security Act
The Second Amendment


Base
Uniden Washington
Mobile
Texas Ranger TR-696FD1C
Handheld
Maxon HCB-40WX
Antennas
Avanti Sigma II
Homemade Full Wave Loop
Homemade 1/2 wave Dipole
Hustler 102" SS Whip and Hustler Ball Mount

Official Moderator - CBRT Complaint Department



Post Reply Previous topicNext topic

Who is online

Users browsing this forum: No registered users and 1 guest