Beam Height above tower and rotor
- RodinKy
- Donor
- Posts: 131
- Joined: January 11th, 2017, 1:27 pm
- Real Name: Rod Eagan
- Antenna: IMAX 2000/Maco Comet
- Radio: DX2517 & Mark IV
- Contact:
Beam Height above tower and rotor
My beam gamma match is just barely above the top of the tower and rotor and my swr is higher than what it should be, can increasing the height above the tower effect my swr? The bottom elements are below the top of the tower.
- jessejamesdallas
- Donor
- Posts: 6,284
- Joined: October 10th, 2004, 7:02 pm
- Handle: Jesse James Dallas
- Real Name: Jesse
- Radio: working
- Contact:
Re: Beam Height above tower and rotor
Mine the elements are maybe a foot lower than the top of the tower, but SWR is fine...not perfect, but under 2.0
Do not argue with an idiot. He will drag you down to his level and beat you with experience.
- MDYoungblood
- Site Admin
- Posts: 10,740
- Joined: June 12th, 2010, 8:05 pm
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Beam Height above tower and rotor
JJD pic shows an excellent install, here is one I did back in the mid 70's, still up today.
Moonraker IV on a 40ft Rohn 25G tower
It is best to get the driven element away from the tower top as much as possible.
3's
Greg
Moonraker IV on a 40ft Rohn 25G tower
It is best to get the driven element away from the tower top as much as possible.
3's
Greg
"321, West Manchester Township, PA"
Official Moderator - CBRT Complaint Department
- RodinKy
- Donor
- Posts: 131
- Joined: January 11th, 2017, 1:27 pm
- Real Name: Rod Eagan
- Antenna: IMAX 2000/Maco Comet
- Radio: DX2517 & Mark IV
- Contact:
Re: Beam Height above tower and rotor
Thanks JJD and MDY looks like I need too make some modifications