The Ubiquos Antron 99 with reflector wire

This forum provides help with antenna installation, as well as guidance on selecting the right antenna for your radio or mobile setup.
Post Reply
User avatar
narfedwards1
6 PILL USER
6 PILL USER
Posts: 60
Joined: October 15th, 2016, 2:12 pm
Handle: the fonz
Real Name: Narf
Call Sign: 421
Antenna: Gainmaster homebrew@25'
Radio: CPI CP2000
Contact:

The Ubiquos Antron 99 with reflector wire

#386659

Post by narfedwards1 »

Consider trying this...slip a 16" piece of stiff 1/2 poly pipe about 12" down the top whip after drilling a 5/16 or so hole in the poly.hold it at 16" with 2 small hose clamps above and below the poly but loose eenuff it can spin.Attach a piece of thin wire say 20-21 feet long.provide a support off mast at adjmt. Rings.R

[ Post made via Mobile Device ] Image
Post Reply