Cobra 29 LX
- smoke blower
- Donor
- Posts: 424
- Joined: June 26th, 2011, 6:05 pm
- Handle: East coast broadcaster
- Real Name: David Sadler
- Radio: Cobra 2000
- Contact:
Cobra 29 LX
I am trying to find out on a cobra 29lx how I can disable the antenna warning light after I tuned it up it comes on and I hate it.
- sonoma
- Donor
- Posts: 1459
- Joined: April 2nd, 2006, 3:10 pm
- Handle: sonoma
- Real Name: sonoma
- Radio: President Washington
- Contact:
Re: Cobra 29 LX
see if thid works on yours. it says all 29 radios. just see.
http://downloads.cobra.com/CB ... B10057.pdf
if you look at the schematic for the 29lx it shows VR6 for adjustments. if that does not do it you could clip the feed to it. just look at the lower left side of the schematic, it has it all there.
http://downloads.cobra.com/CB ... B10057.pdf
if you look at the schematic for the 29lx it shows VR6 for adjustments. if that does not do it you could clip the feed to it. just look at the lower left side of the schematic, it has it all there.
- smoke blower
- Donor
- Posts: 424
- Joined: June 26th, 2011, 6:05 pm
- Handle: East coast broadcaster
- Real Name: David Sadler
- Radio: Cobra 2000
- Contact:
Re: Cobra 29 LX
OK thanks alot Sonoma
-- Sunday, 19 February 2017, 18:46 PM --
I just wanted to let everyone know that also I found out that D9 you can clip one end of that and it disables the Antenna Warning on the cobra 29 LX
-- Sunday, 19 February 2017, 18:46 PM --
I just wanted to let everyone know that also I found out that D9 you can clip one end of that and it disables the Antenna Warning on the cobra 29 LX
- jessejamesdallas
- Donor
- Posts: 6284
- Joined: October 10th, 2004, 7:02 pm
- Handle: Jesse James Dallas
- Real Name: Jesse
- Radio: working
- Contact:
Re: Cobra 29 LX
That's a good deal! Just better be sure everything's hunky-dory with the antenna and it's just either a faulty warning, or has something to do with just having a low DK or running a box.smoke blower wrote:OK thanks alot Sonoma
-- Sunday, 19 February 2017, 18:46 PM --
I just wanted to let everyone know that also I found out that D9 you can clip one end of that and it disables the Antenna Warning on the cobra 29 LX
Do not argue with an idiot. He will drag you down to his level and beat you with experience.
- smoke blower
- Donor
- Posts: 424
- Joined: June 26th, 2011, 6:05 pm
- Handle: East coast broadcaster
- Real Name: David Sadler
- Radio: Cobra 2000
- Contact:
Re: Cobra 29 LX
Yeah I am a 100% sure everything is good on swrs and all I have a MFJ ANALYZER I keep check on them
- MDYoungblood
- Site Admin
- Posts: 10740
- Joined: June 12th, 2010, 8:05 pm
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Cobra 29 LX
Just curious but did you try adjusting VR6 before clipping the diode?
3's
Greg
3's
Greg
"321, West Manchester Township, PA"
Official Moderator - CBRT Complaint Department
- smoke blower
- Donor
- Posts: 424
- Joined: June 26th, 2011, 6:05 pm
- Handle: East coast broadcaster
- Real Name: David Sadler
- Radio: Cobra 2000
- Contact:
Re: Cobra 29 LX
No to be honest I hate that Antenna Warning feature so I said the heck with it I would just do away with it all together.
-- Sunday, 19 February 2017, 20:46 PM --
There is two things I hate on some radios is the antenna warning light and that sound tracker crap
-- Sunday, 19 February 2017, 20:46 PM --
There is two things I hate on some radios is the antenna warning light and that sound tracker crap
- MDYoungblood
- Site Admin
- Posts: 10740
- Joined: June 12th, 2010, 8:05 pm
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Cobra 29 LX
Turning the VR all the way down would have done the same thing and you wouldn't have needed to clip the diode. I usually stick a blank mailing label on the inside cover writing down what has been done to the radio, eliminates confusion later. I agree I don't personally need either but it's a good thing for the average CB'er.
3's
Greg
3's
Greg
"321, West Manchester Township, PA"
Official Moderator - CBRT Complaint Department
- smoke blower
- Donor
- Posts: 424
- Joined: June 26th, 2011, 6:05 pm
- Handle: East coast broadcaster
- Real Name: David Sadler
- Radio: Cobra 2000
- Contact:
Re: Cobra 29 LX
Yeah your right . And that's a great idea to write down what has been done to the radio of other people radio I work on. As far as my own I pretty much remember and if I do some new mods I haven't done before then yeah I do write down the info in a book Incase I do it again. I did the direct injection mod on this new cobra 29 LX and man does it sound good I have had people this weekend ask what in the world are you talking on made me feel like a really accomplished something I have been trying to do for a while now.