Browning Mark IV-Plate Tuning screw
-
RodinKy
- Donor
- Posts: 131
- Joined: January 11th, 2017, 1:27 pm
- Real Name: Rod Eagan
- Antenna: IMAX 2000/Maco Comet
- Radio: DX2517 & Mark IV
- Contact:
Browning Mark IV-Plate Tuning screw
The transmitter half has a recessed screw on the back labeled Plate Tuning, what does this do?
-
MDYoungblood
- Site Admin
- Posts: 10,740
- Joined: June 12th, 2010, 8:05 pm
- Handle: MDYoungblood
- Real Name: Gregory
- Antenna: HyGain AV-6160
- Radio: Icom IC-746 (non pro)
- Contact:
Re: Browning Mark IV-Plate Tuning screw
Look the radio up on CB Trick's, there are owners manuals for most Browning radios.
3's
Greg
3's
Greg
"321, West Manchester Township, PA"
Official Moderator - CBRT Complaint Department
-
bluemeanie
- Donor
- Posts: 349
- Joined: November 1st, 2012, 9:11 pm
- Handle: Blue
- Real Name: Mark Schwab
- Antenna: Max 2000 MACO M105
- Radio: LOTS OF TUBES
- Contact:
Re: Browning Mark IV-Plate Tuning screw
It fine tunes the plate current. Select ma on the meter switch and adjust bias to middle of the indicator. If its close leave it alone. Blue
-
warlock35po
- Duckplucker
- Posts: 150
- Joined: February 10th, 2010, 1:19 pm
- Handle: Warlock35Po
- Real Name: Don
- Call Sign: VE1CSP
- Antenna: Beam and/2 wave Dipole
- Radio: Kenwood 570 D G
- Contact:
Re: Browning Mark IV-Plate Tuning screw
That should be done in Lower Sideband with radio xmtr in ma.mode.
